How much does a 10kva Victron inverter cost? In Nigeria, the most important aspect to know is that sometimes when you shop for the cheapest product, it isn’t always the best. I’ve been there, I know how it feels.
In Nigeria, where power outages are a common occurrence, an inverter is an essential device for households and businesses that require a stable power supply. The Victron inverter is a popular choice in Nigeria due to its high-quality components and reliable performance. A 10kVA Victron inverter is a great choice for larger households and small to medium-sized businesses that require a stable power supply.
10kva Victron Inverter Price
The price of a 10kVA Victron inverter in Nigeria can vary depending on the vendor, location, and other factors. On average, a high-quality 10kVA Victron inverter can cost between ₦1,500,000 to ₦2,000,000. However, the price may be higher or lower depending on the features and capabilities of the inverter.
10kva Victron Inverter Price In Nigeria Product Information
The Quattro 10000 is a combined inverter/charger with two AC inputs. One for mains and one for a generator. Or in the case of two generators: one for each generator. A transfer switch between two AC sources is therefore not needed. This integrated system is what makes the Quattro so unique, just like the earlier models, the Quattro 3kVA, 5kVA and 8kVA. In comparison with a conventional system, many devices are integrated into one.
Two AC Outputs The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
PowerAssist: boosting power Just like the Victron Multi family, the Quattro is equipped with PowerAssist. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Parallel or three phase capability Up to ten Quattro units can operate in parallel. Also up to 10 sets of three units can be parallel connected. This means that there are many different ways to design a system.
System configuring has never been easier After installation, the Quattro is ready to go. If settings have to be changed, this can be done in a matter of minutes with new built-in DIP switches. Alternatively, VE.Net can be used instead of the DIP switches. Victron has also developed sophisticated software, which is available to configure new and advanced features.
Unlimited energy with Victron Energy Victron Energy is a leading supplier of autonomous ‘off-grid’ installations for the Marine, Industry, Automotive, Off-grid and Mobility markets. Products include sine wave inverter/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors, Victron Global Remote, BlueSolar Panels and more. Victron Energy has a strong, unrivalled reputation for technical innovation, reliability and build quality. The products are widely considered to be the professional choice for independent electric power.
10kva Victron Inverter Price In Nigeria Product Specifications
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC Outputs
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
Virtually unlimited power thanks to parallel operation
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 54kW / 60kVA output power and 840 Amps charging capacity.
Three phase capability
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 162kW / 180kVA inverter power and more than 2500A charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.
PowerAssist – Boosting shore or generator power
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
- – In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
- – Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
- – Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power panel, Color Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlVictron Ethernet Remote, Victron Global Remote and the Color Control Panel.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be changed.
